• 技术文章

    西门子IM 155-5 2PN 接口Pronet 接口模块 HF

    2018-04-16 12:39:21
    西门子IM155-5PN接口模块  西门子IM155-5PN接口模块  西门子IM155-5PN接口模块西门子6ES7155-5AA00-0AB0

    西门子6ES7155-5AA00-0AB0

    西门子6ES7155-5AA00-0AB0

    IM 155-5 2PN 接口Pronet 接口模块
     

     


     

    西门子6ES7155-5AA00-0AB0

    Overview

    • 带 RS422 接口的 2 通道计数和位置检测模块
    • 提供了大量参数设置选项,可面向具体任务进行佳调整
    • 可在模块上进行预处理,从而降低控制器的负荷
    • 采用增量式和 SSI 式编码器进行位置检测
    • 速度和时间段测量
    • 存储和比较功能
    • 通过 RS422 信号或 5V-TTL 信号连接编码器

     

    Area of application

    位置检测模块 TMPosInput 2 用于计数和位置检测。

    在计数模式下,该模块检测高速高频信号,并将计数器读数和当前转速传送给控制器。计数器控制可通过数字量输入和输出信号来确保精确的计数器结果和系统中的快速响应。通过大量参数设置选项,可针对手边的任务进行佳调整,降低控制负荷。

    为了进行检测,可连接增量式编码器或 SSI 值编码器。值编码器的优点是,接通后可立即得到轴的位置,无需执行参考运行。


     

    Design

    • 用一个螺丝安装在 S7-1500 安装导轨上
    • 统一的 40 针前连接器,带螺钉型端子(不久将提供插入式端子)
    • 可连接芯线截面积0.25 mm2 至 1.5 mm2(AWG24 至 16)
    • 前连接器的预接线位置
    • 前盖带有可扩充的电缆室,即使完全接线时也如此
    • 通过一对一分配通道状态或诊断 LED、端子和标记,
      可以快速找到并消除错误。印制在前门内侧的接线图提供了接线帮助。
    • 集成式屏蔽

    含在供货范围之内:

    • 用于手工贴标签的一个标签条
    • 一个 U 型连接器
    • 印制有文字的前门
    • 馈电元件、屏蔽夹和屏蔽端子

     

    Functions

    • 统一的显示和诊断方式:
      • 故障(红色 LED)和运行(绿色 LED)模块状态显示
      • 用于信号状态日志的信号状态显示。'0' 和日志。 '1'(绿色 LED)或诊断指示(红色 LED)
      • 显示 24 V DC 电源电压(绿色 LED)
      • 显示总线活动
    • 计数:
      • 高速加计数和减计数,信号频率高达 1 MHz
      • 计数器范围可调节至高达 +/-31 位
      • 增量式编码器的位置检测
      • 通过数字量输入来保存或设置计数
    • 连接 SSI 编码器
      • 使用帧长度为 10-40 位的 SSI 编码器进行位置记录
      • 位置值的长度高达 31 位
      • 隐藏或显示 SSI 帧的附加状态位
      • 测量当前转速
      • 通过数字量输入存储当前位置值(捕获)
    • 测量:
      • 测量当前频率
      • 输出作为周期持续时间的测量值
      • 输出作为转速(各种单位)的测量值
      • 更新时间可设定,用于平滑受扰动的测量信号
    • 支持的功能:
      • 通过集成数字量输入和输出获得高速响应
      • 每个通道两个比较器,用于控制数字量输出
      • 硬件中断,可设置参数
      • 等时同步模式
      • 通过命令和工艺对象进行用户友好的组态
      • 24 V 和 5 V 编码器电源
    • SIMATIC S7-1500 和 ET 200MP 的统一系统功能:
      • 识别及维护数据
      • 固件更新
      • 模块正面的清晰标签
      • 统一的前连接器

     

    Technical Specifications


    文章为作者独立观点,不代表谷瀑环保立场。转载此文章须经作者同意,并附上出处及文章链接。

    Order number

    6ES7551-1AB00-0AB0

     

    S7-1500, TM POSINPUT 2

    General information

     

    Product type designation

    TM PosInput 2

    Product function

     

    • ● I&M data

    Yes; I&M 0

    Engineering with

     

    • ● STEP 7 TIA Portal configurable/integrated as of version

    V12 SP1 / V12 SP1

    • ● STEP 7 configurable/integrated as of version

    V5.5 SP3 / -

    • ● PROFINET as of GSD version/GSD revision

    V2.3 / -

    Supply voltage

     

    Load voltage L+

     

    • ● Rated value (DC)

    24 V

    • ● permissible range, lower limit (DC)

    19.2 V

    • ● permissible range, upper limit (DC)

    28.8 V

    • ● Reverse polarity protection

    Yes

    Input current

     

    Current consumption, max.

    75 mA; without load

    Encoder supply

     

    Number of outputs

    4; One 5V and 24V encoder supply per channel

    5 V encoder supply

     

    • ● 5 V

    Yes; 5.2 V +/-2%

    • ● short-circuit protection

    Yes

    • ● Output current, max.

    300 mA; Per channel

    24 V encoder supply

     

    • ● 24 V

    Yes; L+ (-0.8 V)

    • ● Short-circuit protection

    Yes

    • ● Output current, max.

    300 mA; Per channel

    Power

     

    Power available from the backplane bus

    1.3 W

    Power loss

     

    Power loss, typ.

    5.5 W

    Digital inputs

     

    Number of digital inputs

    4; 2 per channel

    Digital inputs, parameterizable

    Yes

    Input characteristic curve in accordance with IEC 61131, type 3

    Yes

    Digital input functions, parameterizable

     

    • ● Gate start/stop

    Yes;0nly for pulse and incremental encoders

    • ● Capture

    Yes

    • ● Synchronization

    Yes;0nly for pulse and incremental encoders

    • ● Freely usable digital input

    Yes

    Input voltage

     

    • ● Type of input voltage

    DC

    • ● Rated value (DC)

    24 V

    • ● for signal '0'

    -30 to +5V

    • ● for signal '1'

    +11 to +30V

    • ● permissible voltage at input, min.

    -30 V

    • ● permissible voltage at input, max.

    30 V

    Input current

     

    • ● for signal '1', typ.

    2.5 mA

    Input delay (for rated value of input voltage)

     

    for standard inputs

     

    • — parameterizable

    Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms

    • — at '0' to '1', min.

    6 µs; for parameterization 'none'

    • — at '1' to '0', min.

    6 µs; for parameterization 'none'

    for counter/technological functions

     

    • — parameterizable

    Yes

    Cable length

     

    • ● shielded, max.

    1 000 m

    • ● unshielded, max.

    600 m

    Digital outputs

     

    Type of digital output

    Transistor

    Number of digital outputs

    4; 2 per channel

    Digital outputs, parameterizable

    Yes

    Short-circuit protection

    Yes; electronic/thermal

    Limitation of inductive shutdown voltage to

    L+ (-33 V)

    Controlling a digital input

    Yes

    Digital output functions, parameterizable

     

    • ● Switching tripped by comparison values

    Yes

    • ● Freely usable digital output

    Yes

    Switching capacity of the outputs

     

    • ● with resistive load, max.

    0.5 A; Per digital output

    • ●0n lamp load, max.

    5 W

    Load resistance range

     

    • ● lower limit

    48

    • ● upper limit

    12 k

    Output voltage

     

    • ● Type of output voltage

    DC

    • ● for signal '1', min.

    23.2 V; L+ (-0.8 V)

    Output current

     

    • ● for signal '1' rated value

    0.5 A; Per digital output

    • ● for signal '0' residual current, max.

    0.5 mA

    Output delay with resistive load

     

    • ● '0' to '1', max.

    50 µs

    • ● '1' to '0', max.

    50 µs

    Switching frequency

     

    • ● with resistive load, max.

    10 kHz

    • ● with inductive load, max.

    0.5 Hz; Acc. to IEC 60947-5-1, DC-13; observe derating curve

    • ●0n lamp load, max.

    10 Hz

    Total current of the outputs

     

    • ● Current per module, max.

    2 A

    Cable length

     

    • ● shielded, max.

    1 000 m

    • ● unshielded, max.

    600 m

    Encoder signals, incremental encoder (symmetrical)

     

    • ● Input voltage

    RS 422

    • ● Input frequency, max.

    1 MHz

    • ● Counting frequency, max.

    4 MHz; with quadruple evaluation

    • ● Cable length, shielded, max.

    32 m; at 1 MHz

    • ● Signal filter, parameterizable

    Yes

    • ● Incremental encoder with A/B tracks, 90° phase offset

    Yes

    • ● Incremental encoder with A/B tracks, 90° phase offset and zero track

    Yes

    • ● Pulse encoder

    Yes

    • ● Pulse encoder with direction

    Yes

    • ● Pulse encoder with0ne impulse signal per count direction

    Yes

    Encoder signals, incremental encoder (asymmetrical)

     

    • ● Input voltage

    5 V TTL (push-pull encoders0nly)

    • ● Input frequency, max.

    1 MHz

    • ● Counting frequency, max.

    4 MHz; with quadruple evaluation

    • ● Signal filter, parameterizable

    Yes

    • ● Incremental encoder with A/B tracks, 90° phase offset

    Yes

    • ● Incremental encoder with A/B tracks, 90° phase offset and zero track

    Yes

    • ● Pulse encoder

    Yes

    • ● Pulse encoder with direction

    Yes

    • ● Pulse encoder with0ne impulse signal per count direction

    Yes

    Encoder signals, absolute encoder (SSI)

     

    • ● Input signal

    to RS-422

    • ● Telegram length, parameterizable

    10 ... 40 bit

    • ● Clock frequency, max.

    2 MHz; 125 kHz, 250 kHz, 500 kHz, 1 MHz, 1.5 MHz or 2 MHz

    • ● Binary code

    Yes

    • ● Gray code

    Yes

    • ● Cable length, shielded, max.

    320 m; Cable length, RS-422 SSI absolute encoders, Siemens type 6FX2001-5, 24 V supply: 125 kHz, 320 meters shielded, max.; 250 kHz, 160 meters shielded, max.; 500 kHz, 60 meters shielded, max.; 1 MHz, 20 meters shielded, max. 1.5 MHz, 10 meters shielded, max.; 2 MHz, 8 meters shielded, max.

    • ● Parity bit, parameterizable

    Yes

    • ● Monoflop time

    16, 32, 48, 64 µs & automatic

    • ● Multiturn

    Yes

    • ● Singleturn

    Yes

    Interface types

     

    • ● RS 422

    Yes

    • ● TTL 5 V

    Yes; push-pull encoders0nly

    Isochronous mode

     

    Isochronous operation (application synchronized up to terminal)

    Yes

    Filtering and processing time (TCI), min.

    130 µs;0nly for pulse and incremental encoders

    Bus cycle time (TDP), min.

    250 µs

    Interrupts/diagnostics/status information

     

    Alarms

     

    • ● Diagnostic alarm

    Yes

    • ● Hardware interrupt

    Yes

    Diagnostic messages

     

    • ● Monitoring the supply voltage

    Yes

    • ● Wire-break

    Yes

    • ● Short-circuit

    Yes

    • ● A/B transition error at incremental encoder

    Yes

    • ● Telegram error at SSI encoder

    Yes

    Diagnostics indication LED

     

    • ● RUN LED

    Yes; Green LED

    • ● ERROR LED

    Yes; Red LED

    • ● MAINT LED

    Yes; yellow LED

    • ● Monitoring of the supply voltage (PWR-LED)

    Yes; Green LED

    • ● Channel status display

    Yes; Green LED

    • ● for channel diagnostics

    Yes; Red LED

    Integrated Functions

     

    Number of counters

    2

    Counting frequency (counter) max.

    4 MHz; with quadruple evaluation

    Counting functions

     

    • ● Can be used with TO High_Speed_Counter

    Yes;0nly for pulse and incremental encoders

    联 系 人: 周丽媛
    认  证: 工商已核实
    环 宝 通:
    指数 30
    所在地区:
    上海金山区
  • 产品搜索